Fish feed pellet machine is a commonly used equipment in the aquaculture industry. It can make feed raw materials into pellets for fish to eat. However, there are often some problems in the operation of feed pellet machine, which requires us to troubleshoot in time. This article will introduce some common problems of fish feed pellet machine operators and related troubleshooting methods.
- The pellet machine does not discharge smoothly
This is one of the common problems of feed pellet machine. The reason for the poor discharge of pellet machine may be that the feed humidity is too high or the mold aperture is too small. The solution to this problem is to properly control the humidity of the raw materials. If the humidity is too high, it can be treated by drying or adding desiccant; for the case where the mold aperture is too small, a suitable mold can be replaced. - The hardness of feed pellets is not enough
If the hardness of feed pellets is not enough, it is likely caused by insufficient working temperature or insufficient mold pressure. The solution is to increase the working temperature of the feed pellet machine or adjust the mold pressure. - The output of pellet machine decreases
When the output of feed pellet machine decreases, we first need to check the operation of pellet machine. If the pellet machine is found to be operating abnormally, it may be due to abnormal main engine speed or blockage of the supply device. We can adjust the main engine speed, or clean the supply device to troubleshoot. - The feed pellet machine is too noisy
This is a common problem, usually caused by equipment failure or component wear. For this problem, we can check whether the equipment is firmly installed and whether it is necessary to replace severely worn parts. In addition, regular equipment maintenance and lubrication can also reduce noise. - Frequent equipment failures
If the feed pellet machine fails frequently, it may be caused by the equipment working continuously for a long time. The solution to this problem is to reasonably arrange the working time and operation cycle of the equipment and give the equipment appropriate rest time.
Summary
Feed pellet machines play an important role in the aquaculture industry. For operators, it is crucial to solve common problems and troubleshoot them in a timely manner. This article provides corresponding troubleshooting methods for common problems in the operation of fish feed pellet machines. I hope it can provide some help to feed pellet machine operators.
Note: The problems and troubleshooting methods described in this article are for reference only, and the specific operations need to be adjusted according to actual conditions. When operating a feed pellet machine, be sure to pay attention to safety and comply with relevant operating procedures.